On these pages you will find the awesome projects created by our fabulous Inspiration Team. At Blank Page Muse, formerly Sin City Stamps, we are proud to offer deep etched red rubber stamps, pressed to order in the USA. From vintage to grunge and many themes in between, come check out our awesome stamp line! Contact us to learn more about our rubber stamp manufacturing service.
Hi, It's Karen!
Today I brought a vintage style friendship card to share. I created the background with layers of overlapping masking tape which adds a beautiful subtle wrinkly texture.
The paints accentuate all the crevices and is a very effective way to create an aged look so it is very versatile for any vintage & distressed project.
I hope you will try this simple technique to create a textured background because I'm sure you will love it too!
1. Tear short pieces of masking tape and apply them randomly overlapping until you completely cover the white cardstock. Apply 3 colors of paint over the masking tape.
2. Gently blend the paint with a sponge applicator. Add more paint as needed to achieve the
3. Apply gold spray mist randomly over and set aside to dry.
4. Apply white crackle paint in three distinct clusters and set aside to dry.
5. Splatter gold spray mist over the whole page.
6. Stamp clusters of flowers onto white cardstock, paint yellow, and cut.
7. Stamp two different size clocks onto white cardstock and heat set with black embossing powder. Next, attach a gold brad to the center of the clocks.
8. Apply the clocks slightly overlapping below the center of the card front.
9. Adhere the stamped flowers with dimensional foam tape.
10. Stamp the sentiment with black ink onto white cardstock. Lightly ink the edges to create a hazy grey smudge using a sponge applicator. Adhere the sentiment to the top right edge.
11. Apply liquid adhesive to the center of the flowers and sprinkle gold micro beads. Lightly pat them into the glue to make sure they are well embedded in the adhesive.
12. Finally, attach the artwork to a gold metallic card base.
Sin City Stamp Bathtime nude woman also available on the Wing It sheet
Stamp ink in black
Embossing folder and machine.
double sided foam tape
3 ATC sized (2.5" x 3.5")pieces of cardstock (White, Black and Brown)
Make an impression of the stamp on the white cardstock using black ink.
Color the image using pencils.
Add highlights using a white pencil and shadows using a black pencil.
Cut out the image and go around the edges with a black pencil to cover any left over white paper.
Cut the piece of black cardstock a bit smaller as the brown, the brown cardstock will be used as a mat.
Emboss the black piece of cardstock and add the gilding wax over the raised parts using your finger.
Place double sided foam tape over the back of the stamped image.
Adhere the black embossed cardstock in the middle of the brown cardstock and add some gilding wax over the edges. Attache the image on top of the ATC base.
Thanks for visiting.
Here's our quick links to find even more inspiration and to grab your own Sin City Stamps: Sin City Stamps Store Sin City Stamps Facebook Group And you are here at "The Blog" but make sure you keep checking back - even better "follow" us so you don't miss any of the Inspiration Team posts
Hello my dear crafty friends and welcome!
Irit is here again and this is my second February tutorial for you.
Today I am going to share small art pieces made with small boards using 3 similar but totally different Sin City stamps in 3 different color schemes.
The only paint I used here are mists and I wanted to show you my most favorite way to add stamped images to textured surfaces.
Mixed Media boards- chipboards or sturdy cardboard.
Texture paste Clear
Black permanent ink
Color ink mists
Ribbon, wool, yarn
Step by step instructions:
1. Cover three boards with white gesso and let it dry.
2. Add a thick layer of Clear texture paste using three different small stencils. Use a different stencil on each board.
3. Remove the stencils. The paste becomes clear when dry.
4. Cover the edges of each board with white crackle paste. Again, the magic word: Let it dry!
You see the crackles when it's dry, not before.
5. Stamp all three face stamps using permanent black ink onto white tissue paper.
6. Tear each stamped image apart and glue over the boards as shown with Gel medium over and under the stamped piece.
7. Glue the " hair" to each image: the ribbon, yarn and the natural wool . The colors don't matter as we cover the hair with a thick layer of white gesso.
8. Mist each board with different colors. Pick the colors that fit the stamped image mood. For this pretty, but angry lady, a vintage mix of colors was the best choice.
9. Mist the second board with some shabby, dreamy colors.
10. Mist the last board with a mix of lovely pastel colors.
11.Stamp the sentiments for each board in the same black ink and tissue way.
Natural beauty was the best sentiment for the "angry" lady.
Dream key was the choice for the second one.
For the bright board stamp " Happy Birthday" sentiment and tear the word Happy.
Glue all words with Gel Medium.
I really hope that you liked my small art pieces (bigger than ATC, but not the card size).
You can also buy almost all of the stamps in this Natural Beauty sheet of rubber.
See you again next month!
Jenn here with you today to share my latest project using beautiful stamps from Sin City Stamps!
For this wall hanging I used the following supplies: Sin City Stamps Love of Butterflies
8X12 art board
Heavy black gesso
Spray inks in shades of teal, purple, and gold
3D Matte gel
bits and baubles...(stash)
So here is how it was done...!
1. Start by covering your surface with black gesso and let dry.
Using an old credit card or spatula scrape on the crackle paste in different levels, (thin in some thicker in others)
Let this dry.
Keep in mind that if you are using a heat tool that the crackle paste will bubble if you hold heat in one area for too long so be sure to move it constantly around your surface.
2. Using the stamps and black archival ink randomly stamp onto the white crackle paste and let dry. Now you can spray on some color!
3.While you are waiting for the colors to dry, start to prepare your stamped butterflies.
Use a ink color of your choice and embossing powder in either clear or an iridescent such as I did. Dry with heat tool and cut out. Set these aside.
4. Now for some real fun!!
Gather up all of the bits, baubles and flowers you have chosen and lay them out how you want them on your piece. Once you do this and get the look you want I recommend you snap a quick photo to refer as you glue it all down.
5. Glue everything in place and then let dry. Once it dries cover all of the bits with black gesso but do not paint the crackle space.
6. Now lightly brush a mixture of white gesso and crackle paste on the bits but do not cover all of the black. Once you have let it dry and then spray your ink colors one at a time drying in between until you achieve the desired look. I also used a brush to apply some gold I added at the end as well as with the teal in some areas. Finish it all off with micro beads for texture. Place the beautiful butterflies where you like to finish!
I hope you find inspiration in this project and that it guides you to make one of your own!
Remember to go to Sin City Stamps to purchase these any many other beautiful stamps!