Steampunk Tray

Hello! Peggy here to show you how I made my shadow box out of a serving tray. This month we partnered with Walnut Hollow Prooducts to showcase Siin City Stamps.

Products used today are

Sin City Stamps

Walnut Hollow Serving Tray

Acrylic paint brown/black/gold/silver

sandpaper

Metal tape

Chipboard lettering

Chipboard gears

Tim Holtz Chipboard clock

Gold Embossing powder

Cardstock

Patterned paper

Foil embellishments 

chain

Versa Mark ink

heat gun

Distress ink

I started by painting my box brown with a large brush in the same direction of the grain.

Second coat was watered down black acrylic paint appied with a cloth

This is my result. Next distress paints in gold and silver lightly appied to the edges and outside. Now for some sandpaper to further distress the edges.

I hand cut a butterfly by folding a piece of cardstock in half and cutting half of a wing leaving the center in tact. When opened I had a matching wing butterfly.

Next I cut small pieces of metal tape and applied it solely vertically and horizontally. Then I glued chipboard gears and lettering and covered with metal tape. I used the bottom of a paint brush to bernish all indentations. I also ran some black acrylic paint over the lettering and rubbed off creating shadows in the crevasses.

Below I stamped background journaling stamps from the Terri Sproul collection as well as some steampunk images. I also distressed the edges with distress stain.

I found the perfect spot to stamp the thee headed lady by Sin City Stamps. I also needed a steampunk airshiship and balloon which I stamped on black cardstock with Versa Mark ink and gold embossed using my heat gun.

One more stamp embellishment a steampunk pocket watch stamped with stazon ink on metal.

Put it all together with chains hanging from the ballon and on the handles. A few more metal gears on the outside and thats it!

I hope you enjoyed todays tutorial! Please stop by Walnut Hollow and Sin City Stamps for your crafting needs.

A Christmas Clock with Walnut Hollow

Hello, and welcome to my first Sin City Stamps post for December.  This month, we are proud to have Walnut Hollow as our sponsor.

I began my project with their rustic wood ledge.  It is quite rough, but instead of sanding it, I covered it with a good, thick coat of white gesso.  I wanted to maintain the texture without getting splinters.

Next, I covered the front and sides of the box with the green gold texture paint.  This paint is very thick and needed to be applied with a palette knife.  After spreading a medium thick coat, I dabbed the paint with the side of my knife to obtain this cool texture.

Mist entire box with Turquoise Shimmer Mist, then Primary Yellow, dabbing some of the excess mist as you go.  Let dry.

Apply Patina Gilder's Paste to high spots with your best tool, your finger.

Mist entire box again with Heirloom Gold Perfect Pearls mist.  Let dry.  Can you see the pretty gold flecks?

Apply German Silver Gilder's Paste to the high spots, leaving some of the Patina showing.  Now I am really loving it.

Drill  a hole in the center of the wooden snowflake large enough for the clock hand shaft to go through easily.  I also stamped snowflakes from Penguins on Ice set with Versamark ink and silver embossing powder.

Paint the wooden snowflake with the orange yellow metal color paint.  Let dry.  Use a baby wipe or damp paper towel and gently remove the orange yellow paint from on top of the embossed snowflakes to reveal the silver embossing.

Adhere two Clock Die Cuts together for extra thickness.

Heat emboss the clock die with Versamark ink and silver embossing powder.  Two coats of embossing powder were needed to get a smooth, metal look.

Adhere clock face to front of wooden snowflake.  

Paint the metal pendulum with the orange yellow metal color paint.  Let dry.  The photo shows just the hanger painted to show you the difference.

Measure and paint two ¼" wooden dowels with the orange yellow metal paint and adhere to lower half of box along the sides.

Put clock parts together and adhere wooden snowflake clock onto box at the top, just above the two dowels.  Adhere glittered snowflake to pendulum, and three rusty metal snowflakes to inside box.

Adhere reindeer ornament and holly sprig to bottom of box.

Select four matching scroll die cut pieces from the Clock Die Cuts, cover with Versamark ink, and heat emboss with a rust embossing powder.  The photo shows the one on the left "rusted".

Adhere to the sides of the box in the center.

Another look from the front and side!  I really love how this turned out.

Supplies:

Sin City Stamps:  Penguins on Ice rubber stamp set; Clock Die Cuts; Clock Die Cut
Walnut Hollow Rustic Wood Ledge
Other:  white gesso, Green Gold Texture paint; Versamark ink pad; wooden laser cut snowflake; Primary Yellow and Turquoise Shimmer Mister; Patina  and German Silver Gilder's Paste; Heirloom Gold Perfect Pearls Mist; Orange Yellow Precious Metal Color; Clock with Pendulum parts, rusty metal snowflakes, Christmas ornaments

I hope you enjoyed my project today.  I know it was long, but mixed media usually is.  In any case, I hope you are inspired to make your own clock, whether for Christmas, or as a gift specific to someone you know.

Thanks for stopping by, and be sure to visit Sin City Stamps and the team for all your stamping inspiration, and gift giving, products.

Have a super wonderful weekend!

Barbara